Sunday, March 20, 2005

$4 Carbonator

Products like The Carbonator look like a great idea until you see the price tag. The link back there is the cheapest I have seen. The local homebrew shops in my area want $15 for it. In the end it's only a plastic cap with a check valve and disconnect. It's also something who's function you can reproduce for under $4, under a dollar if you don't want the check valve function.

This hack works a lot like the Vacuum Beer Bleeder below with one modification for managing the extra pressure.

Again you are going to need a few fittings:

I know that adds up to more then $4, you will only one of the instant hose fittings. If you haven't see these before the are kinda like ad external hose barb. There is an o-ring inside to seal around the tubing and some little barbs to grab the outside of the tubing. The really cool part is you press on the front of the fitting and it releases the tubing. Kind of like a simple quick disconnect, but you don't need a fitting on the tubing. As for the check valve you only need this if you want to carbonate something and store/transport it. If you only want to quickly carbonate something like a beer sample or water you won't needed the check valve. So you could do this for just over $1 a cap.

So to get things started. You will need to drill a 3/16" hole in the center of the cap. Next thread in one of the hose barbs making sure to include the little gasket they give you. Now to make sure the hose barb stays in place thread a coupling onto the end of the hose bard now sticking thru the inside of the cap. Tighten this being careful not to strip it. Now just add some hose and the check valve if you desire. Use the instant fitting to make the connection to your CO2 regulator.

I find that 30psi and about 1min of violent shaking will carbonate any cold (40F or lower) liquid. Let it sit for another minute still under pressure before you remove the cap. I mostly use this for making soda water and carbonating beer samples.

Note: You could use a regular #10-32 nut in place of the coupler just make sure it is brass or stainless.



3 comments:

michelmiller25596887 said...

I read over your blog, and i found it inquisitive, you may find My Blog interesting. My blog is just about my day to day life, as a park ranger. So please Click Here To Read My Blog

joelando9422 said...

Hey Meet Me Today I'm available in your area tonite GO HERE NOW!

franalexander37182590 said...

Get any Desired College Degree, In less then 2 weeks.

Call this number now 24 hours a day 7 days a week (413) 208-3069

Get these Degrees NOW!!!

"BA", "BSc", "MA", "MSc", "MBA", "PHD",

Get everything within 2 weeks.
100% verifiable, this is a real deal

Act now you owe it to your future.

(413) 208-3069 call now 24 hours a day, 7 days a week.